Orchid MicroDI

Housed in a strong sheet steel case 80 X 50 X 40 – it has only a jack socket input for
connection to the instrument and an XLR output to feed the microphone input of a
mixing desk – which can be located many hundreds of metres away if necessary. It
must receive Phantom Power from the mixer as it is an active design – a red LED will
indicate power present.
A non slip rubber pad is fitted to the base.
Technical specification:
Input impedance: 1 M Ohm for minimal loading of instrument.
Harmonic distortion: less than 0.008% at normal input levels at 1kHz.
Maximum input level: +16dBu for 0.1% harmonic distortion.
Noise: better than -95dB CCIR QPk weighted or -108dB 22-22K bandwidth.
Frequency response: 20Hz-30kHz +/- 0.3dB ref 1kHz.
Earth lift isolation is incorporated within the design – no switch is fitted, or necessary.
Weight: 150g